| Electronics | Headphone Jack | 1/4" TRS Active Stereo | |
|---|
| Phantom Power | +48 VDC (±2 VDC) | |
|---|
| Power Consumption | 85W (Continuous) | |
|---|
| Voltage | Voltage | |
|---|
| Hardware | Digital Audio AES EBU Output | XLR Male | |
|---|
| Digital Audio AVB Audio Network Ports | Locking XLR, Ethernet | |
|---|
| Digital Audio Network Control Port | RJ-45 | |
|---|
| Digital Audio USB Recording Port | USB 2.0, Type-B | |
|---|
| Tape Connection Type | RCA Female, Unbalanced (Stereo Pair) | |
|---|
| Inputs | Line Input Connection Type | 1/4" TRS Female, Balanced | |
|---|
| Line Inputs Frequency Response | 20-20 kHz (±0.5 dBu at Unity Gain) | |
|---|
| Line Inputs Impedance | 10 kΩ | |
|---|
| Line Inputs Maximum Level | | +18 dBu |
|---|
| Line Inputs Signal To Noise Ratio | 94 dB (Ref | +4 dB, 20 kHz BW, Unity Gain, A-Weighted) |
|---|
| Line Inputs Total Harmonic Distortion | <0.005%, +4 dBu, 20-20 kHz, Unity Gain, Unweighted | |
|---|
| Microphone Input Connection Type | XLR Female, Balanced | |
|---|
| Microphone Preamp Common Mode Rejection Ratio | 65 dB (1 kHz at Unity Gain) | |
|---|
| Microphone Preamp Frequency Response | 20-20 kHz (±0.5 dBu at Unity Gain) | |
|---|
| Microphone Preamp Gain Control Range | 0 dB to 60 dB (±1 dB) | |
|---|
| Microphone Preamp Input Impedance | 1 kΩ | |
|---|
| Microphone Preamp Maximum Input Level | | +12 dBu (Unity Gain) |
|---|
| Microphone Preamp Signal To Noise Ratio | 94 dB (Ref | +4 dB, 20 kHz BW, Unity Gain, A-Weighted) |
|---|
| Microphone Preamp Total Harmonic Distortion | <0.005%, +4 dBu, 20-20 kHz, Unity Gain, Unweighted | |
|---|
| Tape Maximum Input Level | +12 dBu, ±0.5 dBu | |
|---|
| Measurements | Product Depth | 22.97” (583.84 mm) | |
|---|
| Product Height | 6.51” (165.36 mm) | |
|---|
| Product Width | 17.59” (446.66 mm) | |
|---|
| Output | Headphone Outputs Frequency Response | 20 Hz to 20 kHz, +/-0.5 dB | |
|---|
| Headphone Outputs Maximum Output | 100 mW/ch. @ 60Ω load | |
|---|
| Headphone Outputs Signal To Noise Ratio | 96 dB, 1 kHz, Maximum Gain, 20 Hz BW, Unweighted | |
|---|
| Headphone Outputs Total Harmonic Distortion | 0.01%, 1 kHz, Maximum Gain, 20 Hz BW, Unweighted | |
|---|
| Line Outputs Connection Type | 1/4" TRS Female, Balanced | |
|---|
| Line Outputs Maximum Output Level | | +18 dBu, ±0.5 dBu |
|---|
| Line Outputs Output Impedance | 100 Ohms | |
|---|
| Tape Maximum Output Level | +18 dBu, ±0.5 dBu | |
|---|
| Tape Output Impedance | 100 Ohms | |
|---|
| XLR Outputs Maximum Output Level | +24 dBu, ±0.5 dBu | |
|---|
| XLR Outputs Output Impedance | 100 Ohms | |
|---|
| Performance | Crosstalk (Adjacent Channels) | -87 dB (Reference | +4 dBu, 20 Hz-20 kHz, Unweighted) |
|---|
| Digital Audio Bit Depth | 24 | |
|---|
| Digital Audio Dynamic Range | ADC Dynamic Range: 115 dB (A-Weighted, 48 kHz), DAC | |
|---|
| | Digital Audio Dynamic Range ADC Dynamic Range: 115 dB (A-Weighted, 48 kHz), DAC Dynamic Range: 115 dB (A-Weighted, 48 kHz) | |
|---|
| Digital Audio Reference Level For Zero dBFS | | +18 dBu |
|---|
| Digital Audio Total System Latency | 1.9 ms (local routing, analog in-analog out, all processing active) | |
|---|
| StudioLive Series III System Requirements | Windows® | Windows 10 20H1 (64-bit only) or Windows 11 (64-bit only) | |
|---|
| | 200 MB storage space and 8 GB RAM for Universal Control (required for firmware updates and low-latency ASIO support) | |
|---|
| | Available USB port | |
|---|
| | The above are the hardware system requirements for this product. | |
|---|
| | DAW software and Operating System requirements vary. | |
|---|
| macOS® | macOS version 10.14 or later | |
|---|
| | 200 MB storage space and 8 GB RAM for Universal Control (required for firmware updates) | |
|---|
| | Available USB port | |
|---|
