Zoom F8n Pro Multitrack Field Recorder

Introducing the Zoom F8n Pro Multitrack Field Recorder

The Zoom F8 Pro expands on the ever-popular features of the F8n which set a major benchmark for audio recorders with professional-level hardware. Producing clean audio is essential for filmmakers and sound professionals alike and the F8n Pro even supports 32-bit floating recording to give users full dynamic range. This portable recording device has a variety of high-quality features including 8 discrete inputs and 10 tracks of simultaneously recording dual A/D converters up to 192 kHz sampling frequency. Low noise preamps with up to 75dB gain and +4dB In/Out levels are also part of the F8n Pro.

Additional features

• Look-ahead hybrid limiters
• Zoom’s AutoMix™ function
• Accurate 0.2 ppm timecode
• Three power options and redundant recording on 2SD cards => professional appeal
• Can be used as a 32-bit float/96kHz USB audio interface with 8 inputs and 4 outputs
• Simultaneous recording on internal SD cards and via USB
• Extensive support for Ambisonics Audio and ability to control via F8n pro control app (available for android or iOS)

Create immersive audio

With 8 inputs and 10 tracks, the F8n Pro can capture the most complex audio, expanding your options so that you can create sonic magic in post. 32-Bit Float is a game-changer. The F8n Pro uses dual A/D converters and professional-grade preamps to capture clip-free audio – without ever needing to adjust gain!

Multiple feeds and formatting options

The F8n Pro has three outputs for external devices, headphones, and camera connections. You can keep tabs on your tracks pre- or post-fader, check levels, route signals to the left or right and set alert tones for battery and recording status. The F8n Pro records in BWF-compatible WAV formats up to 32-bit resolution and at sample rates up to 192 kHz.

Built-in processing

The F8n Pro features flexible signal routing from all inputs to all outputs, phase inversion and Mid-Side decoding. It also provides high-pass filtering to reduce the sound of wind and other noise. Input and output delays are also available.

State-of-the-art timecode

Keep your tracks perfectly synced even when you power down. On or off, the F8n Pro’s Temperature Compensated Crystal Oscillator (TCXO) generates time code at 0.2 ppm accuracy. Additionally, the pre-record function allows you to check your environment and settings, capturing up to 6 seconds of audio before you hit the RECORD button.

Stay focused with Zoom AutoMix™

Zoom AutoMix lets you keep your eyes on the action by automatically adjusting the levels of your mix to reduce ambient sound.

Full metadata entry

The track name, scene names, notes, and more can be entered directly from the unit or via the Zoom F8 Control App for iOS.

Record and stream, together

When connected to your computer, the F8n Pro can be used as a 8-in / 4-out audio interface. Record and stream in 32-bit float / 96khz while simultaneously recording to SD cards. The F8 Control App lets you monitor signals, adjust levels, trigger transport controls, enter metadata and more from your Android device, iPhone or iPad via Bluetooth.

Power up

The F8n Pro is well-equipped for long location shoots or remote fieldwork, with a variety of power options and massive storage. Use eight AA alkaline batteries for 5 hours of power or plug in with the included AD-19 AC adapter. External 9-18 volt DC battery packs can be used with a 4-pin Hirose connector.

Dual memory and 360º audio

Record simultaneously on two SD cards, up to 1TB each, allowing for redundant recording. The F8n Pro’s Ambisonics mode offers precision A-to-B decoding and balanced gain linking, enabling you to capture spatial audio for VR, AR and more.

What’s in the box?

• ïF8n Pro Field Recorder
• ïZoom AD-19 12V AC adapter
• ïOperation Manual

Inputs	INPUT1 - 8	Connectors	XLR/TRS combo jacks (XLR: 2 hot, TRS: TIP hot)
	Input source set to Mic (→ Setting the input source (Input Source))	Input gain	+10 – +75 dB
		Input impedance	3 kΩ or more
		Maximum input level	+4 dBu (at 0 dBFS)
		Phantom power	+24/+48 V, 10 mA maximum per channel
	Input source set to Line (→ Setting the input source (Input Source))	Input gain	−10 – +55 dB
		Input impedance	5 kΩ or more
		Maximum input level	+24 dBu (at 0 dBFS)
	Equivalent input noise		−127 dBu or less (A-weighted, +75 dB input gain, 150 Ω input)
	Frequency response		20 Hz – 60 kHz, +0.5 dB/−1 kHz (192 kHz sample rate)
	A/D dynamic range		113 dB typ. (−60 dBFS input, A-weighted)
	Crosstalk		−90 dB or less (between adjacent channels, 1 kHz)
	MIC IN		ZOOM mic capsule input (use disables Inputs 1/2)
	SLATE MIC		Built-in mic for voice memos can be assigned to tracks freely
Outputs	MAIN OUT 1/2	Connectors	TA3 connectors (balanced output, 2: hot)
		Output impedance	150 Ω or less
		Reference output level	−10 dBV (normal output level) +4 dBu (line output level) 1 kHz, 600 Ω load
		Maximum output level	+10 dBV (normal output level) +24 dBu (line output level) 1 kHz, 600 Ω load
	SUB OUT 1/2	Connector	3.5 mm stereo mini (unbalanced output)
		Output impedance	100 Ω or less
		Reference output level	−10 dBV (normal output level) −40 dBu (mic output level) 1 kHz, 10 kΩ load
		Maximum output level	+10 dBV (normal output level) −20 dBu (mic output level) 1 kHz, 10 kΩ load
	HEADPHONE	Connector	1/4 inch stereo (unbalanced output)
		Output impedance	18 Ω or less
		Maximum output level	100 mW + 100 mW (32 Ω load)
	D/A dynamic range		105 dB typ. (−60dBFS input, A-weighted)
Recording media		Dual SD card slots	SDHC cards: 4 GB – 32 GB SDXC cards: 64 GB – 1 TB
Recording formats	When WAV selected	Supported formats	44.1, 47.952, 48, 48.048, 88.2, 96 and 192 kHz 16-bit linear, 24-bit linear and 32-bit float Mono/stereo/2-10 ch poly BWF and iXML
		Maximum simultaneous recording tracks	10 (8 inputs + stereo mix) 8 (at 192 kHz sampling rate)
	When MP3 selected	Supported formats	128, 192 and 320 kbps 44.1 and 48 kHz ID3v1 tags
		Maximum simultaneous recording tracks	2
Recording time		Using a 32GB card	23:08:00 (48 kHz/32-bit float stereo WAV) 5:47:00 (192 kHz/32-bit float stereo WAV)
Timecode		Connector	BNC
		Modes	Off, Int Free Run, Int Record Run, Int RTC Run, Ext and Ext Auto Rec (audio clock can be synchronized to timecode)
		Frame rates	23.976ND, 24ND, 25ND, 29.97ND, 29.97D, 30ND and 30D
		Precision	±0.2 ppm
		Supported input levels	0.2 - 5.0 Vpp
		Input impedance	4.6 kΩ
		Output level	3.3 Vpp
		Output impedance	50 Ω or less
Power supplies		AA batteries	8 (alkaline, nickel-metal hydride or lithium)
		AC adapter	ZOOM AD-19, DC 12 V/2 A, center plus
		External DC power supply	HIROSE HR10A-7R-4S 4-pin connector (1 pin: -, 4 pin: +), 9–18 V
Estimated continuous recording times		2 channels to SD 1 48kHz sampling frequency (32-bit float/16-bit linear/24-bit linear) MAIN/SUB OUT OFF, TIMECODE OFF, LED/LCD brightness 5, 32Ω headphones, PHANTOM OFF	Alkaline batteries: about 6 hours
			NiMH batteries (2500 mAh): about 8.5 hours
			Lithium batteries: about 12 hours
		8 channels to SD 1 48kHz sampling frequency (32-bit float/16-bit linear/24-bit linear) MAIN/SUB OUT OFF, TIMECODE OFF, LED/LCD brightness 5, 32Ω headphones, PHANTOM OFF	Alkaline batteries: about 5 hours
			NiMH batteries (2500 mAh): about 7 hours
			Lithium batteries: about 10 hours
		8 channels to SD 1/2 192kHz sampling frequency (32-bit float/16-bit linear/24-bit linear) MAIN/SUB OUT ON, TIMECODE Int Free Run, LED/LCD brightness 60, 32Ω headphones, PHANTOM 48 V	Alkaline batteries: about 0.5 hours
			NiMH batteries (2500 mAh): about 1.5 hours
			Lithium batteries: about 2.5 hours
Display			2.4 inch full-color LCD (320 × 240)
USB	Connector		Mini-B USB 2.0 High Speed• Use a USB cable that supports data transfer. 　• USB bus power operation is not supported.
	Mass storage operation	Class
	Multi Track audio interface mode operation (driver required for Windows, not required for Mac)	Class	USB 2.0 High Speed
		Specifications	Sampling rate: 44.1/48/88.2/96 kHz Bit depth: 24-bit linear/32-bit float 8-in/4-out
	Stereo Mix audio interface mode operation (no driver required) • Supports audio interface operation with iOS/iPadOS devices	Class	USB 2.0 Full Speed
		Specifications	Sampling rate: 44.1/48 kHz Bit depth: 16-bit linear 2-in/2-out
	Audio interface operation with recording (driver required for Windows, not required for Mac)	Class	USB 2.0 High Speed
		Specifications	Sampling rate: 44.1/48 kHz Bit depth: 24-bit linear/32-bit float 10-in/4-out
Power consumption			15 W
External dimensions			7.0 in. (W) × 5.5 in. (D) × 2.1 in. (H) 178.2 mm (W) × 140.3 mm (D) × 54.3 mm (H)
Weight (including batteries)			1200 g