|
|
|
|
Electronics |
Headphone Jack |
1/4" TRS Active Stereo |
|
|
Phantom Power |
+48 VDC (±2 VDC) |
|
|
Power Consumption |
85W (Continuous) |
|
|
Voltage |
220-240V UK |
|
Hardware |
Digital Audio AES EBU Output |
XLR Male |
|
|
Digital Audio AVB Audio Network Ports |
Locking XLR, Ethernet |
|
|
Digital Audio Bluetooth Input |
4.1, Stereo |
|
|
Digital Audio Network Control Port |
RJ-45 |
|
|
Digital Audio USB Recording Port |
USB 2.0, Type-B |
|
|
Tape Connection Type |
RCA Female, Unbalanced (Stereo Pair) |
|
Inputs |
Line Input Connection Type |
1/4" TRS Female, Balanced |
|
|
Line Inputs Frequency Response |
20-20 kHz (±0.5 dBu at Unity Gain) |
|
|
Line Inputs Impedance |
10 kΩ |
|
|
10 kΩ Line Inputs Maximum Level |
|
+18 dBu |
|
Line Inputs Signal To Noise Ratio |
94 dB (Ref |
+4 dB, 20 kHz BW, Unity Gain, A-Weighted) |
|
Line Inputs Total Harmonic Distortion |
<0.005%, +4 dBu, 20-20 kHz, Unity Gain, Unweighted |
|
|
Microphone Input Connection Type |
XLR Female, Balanced |
|
|
Microphone Preamp Common Mode Rejection Ratio |
65 dB (1 kHz at Unity Gain) |
|
|
Microphone Preamp Frequency Response |
20-20 kHz (±0.5 dBu at Unity Gain) |
|
|
Microphone Preamp Gain Control Range |
0 dB to 60 dB (±1 dB) |
|
|
Microphone Preamp Input Impedance |
1 kΩ |
|
|
Microphone Preamp Maximum Input Level |
|
+12 dBu (Unity Gain) |
|
Microphone Preamp Signal To Noise Ratio |
94 dB (Ref |
+4 dB, 20 kHz BW, Unity Gain, A-Weighted) |
|
Microphone Preamp Total Harmonic Distortion |
<0.005%, +4 dBu, 20-20 kHz, Unity Gain, Unweighted |
|
|
Tape Maximum Input Level |
|
+12 dBu, ±0.5 dBu |
Measurements |
Product Depth |
22.97” (583.84 mm) |
|
|
Product Height |
6.51” (165.36 mm) |
|
|
Product Width |
32.37” (822.21 mm) |
|
Output |
Headphone Outputs Frequency Response |
20 Hz to 20 kHz, +/-0.5 dB |
|
|
Headphone Outputs Maximum Output |
100 mW/ch. @ 60Ω load |
|
|
Headphone Outputs Signal To Noise Ratio |
96 dB, 1 kHz, Maximum Gain, 20 Hz BW, Unweighted |
|
|
Headphone Outputs Total Harmonic Distortion |
0.01%, 1 kHz, Maximum Gain, 20 Hz BW, Unweighted |
|
|
Line Outputs Connection Type |
1/4" TRS Female, Balanced |
|
|
Line Outputs Maximum Output Level |
+18 dBu, ±0.5 dBu |
|
|
Line Outputs Output Impedance |
100 Ohms |
|
|
Tape Maximum Output Level |
|
+18 dBu, ±0.5 dBu |
|
Tape Output Impedance |
100 Ohms |
|
|
XLR Outputs Maximum Output Level |
+24 dBu, ±0.5 dBu |
|
|
XLR Outputs Output Impedance |
100 Ohms |
|
Performance |
Crosstalk (Adjacent Channels) |
-87 dB (Reference |
+4 dBu, 20 Hz-20 kHz, Unweighted) |
|
Digital Audio Bit Depth |
24 |
|
|
24 Digital Audio Dynamic Range |
ADC Dynamic Range: 115 dB (A-Weighted, 48 kHz), DAC |
|
|
|
Dynamic Range: 115 dB (A-Weighted, 48 kHz) |
|
|
Digital Audio Reference Level For Zero dBFS |
+18 dBu |
|
|
Digital Audio Total System Latency |
1.9 ms |
|
System Requirements |
Windows® |
Windows 10 20H1 (64-bit only) or Windows 11 (64-bit only) |
|
|
|
200 MB storage space and 8 GB RAM for Universal Control (required for firmware updates and low-latency ASIO support) |
|
|
|
Available USB port |
|
|
|
The above are the hardware system requirements for this product. |
|
|
|
DAW software and Operating System requirements vary. |
|
|
macOS® |
macOS version 10.14 or later |
|
|
|
200 MB storage space and 8 GB RAM for Universal Control (required for firmware updates) |
|
|
|
Available USB port |
|